MT-500 Digital Flange Connection Magnetostrictive Level Meter

The MT series Magnetostrictive Liquid Level Meter is based on the magnetostrictive principle and is used to measure the continuous quantity of liquid level and interface. It adopts a two-wire output interface design with a standard 4~20mA current output mode. It has high measurement accuracy and is mainly used in various liquid tank level industrial measurement and control, such as petroleum, chemical raw material storage, industrial processes, biochemical, pharmaceuticals, food and beverage, tank farm management, and underground storage of gas stations. It can also be used for dam water level, reservoir water level monitoring, and sewage treatment, etc.

The instrument consists of a circuit unit, an explosion-proof housing, and a rod-shaped sensing element, and there are multiple sensor models to choose from.

Specification

Measuring Range: 50mm~6000mm

Material: SUS304/316L

Case Material: Aluminum Alloy

Repeatability: ±0.004% F.S

Connection: Thread 1-1/2"~3";Flange 2~6"

Process Temperature: -20~+200°C(-68~+392℉)

Process Pressure: -1~60 Bar(-14.5~870 Psi)

Output: 4-20mA/RS485

Feature

● Strong versatility: the measurement is not affected by the dielectric constant of the measured liquid, and changes in steam, temperature, and pressure on-site also have no effect on the measurement.

● Long lifespan: the measuring element does not come into contact with the liquid, ensuring a long lifespan. 

● Interference resistance: it has lightning protection, radio frequency interference prevention, pollution prevention, dust prevention, and reverse positive protection functions.

● Accurate and reliable: high precision, high resolution, high stability, and high reliability.

● Key calibration: it can be calibrated via the electronic unit, and the high and low liquid levels can be directly calibrated on-site, making it convenient and fast to use. It does not require regular re-adjustment or maintenance. 

Magnetostrictive Liquid Level Meter17480945.pdf